MICROCAPACITY / SPL-CMP

Micro & miniature single point load cells.

Industrial micro and miniature single point load cells, with documented 200 g–5 kg reference variants for dosing, precision platforms and compact OEM equipment.

compact single point beam long open flexure circular side cover and black cable — supplier-source product reference
Product geometry reference; confirm the exact order configuration.

Start with the empty platform.

A 200 g rated sensor has to support the platen and fixtures as well as the measured product. Include dead load, eccentricity, cable forces and accidental handling loads in the selection. Capacity does not state scale resolution.

SPL-CMP-101 uses a 110 mm body and a 100 × 100 mm reference platform; SPL-CMP-102 uses a 70 mm body and a 200 × 200 mm reference platform. Width, output and thread-depth information vary with design and capacity.

Open mounting reference PDFs

Design for the smallest useful signal.

Request exact-model vmin, noise, creep and temperature data for the intended measurement. The catalogue C3 declaration does not specify the usable resolution of your finished machine or establish medical-device approval.

For moving doses or short weigh windows, validate the mechanical resonance, vibration and filter response on the real assembly. The listed sensors provide analog mV/V output; digital electronics are a separate integration choice.

Applications include precision dispensing, compact filling modules and OEM instrument platforms. Medical equipment requires its own system validation. No reference below 200 g is assigned in this release.

Installation concept: spacers maintain free flexure travel; the actual stop clearance requires model-specific deflection data.
Installation concept: spacers maintain free flexure travel; the actual stop clearance requires model-specific deflection data.

Compare capacity, mounting and bridge output.

These reference configurations use catalogue-revision data. Freeze the supplied drawing and acceptance scope before the sample order.

SPL-CMP-101

Microcapacity open-flexure single point

Aluminum alloy · IP65 · C3 catalogue declaration

SPL-CMP-101 source mounting outline with millimetre dimensions and thread callouts

Reference outline, not a released production drawing. Download the PDF for its capacity-specific dimensions. Do not scale this image.

CapacityL × W × H (mm)Thread / engagementAnalog outputReference platform (mm)Select
200 g110 × 6 × 33M3 / 12 mm0.8–1.0 mV/V100 × 100Request this variant
300 g110 × 10 × 33M3 / 12 mm0.8–1.0 mV/V100 × 100Request this variant
600 g110 × 10 × 33M3 / 12 mm0.8–1.0 mV/V100 × 100Request this variant
1 kg110 × 10 × 33M3 / 12 mm0.8–1.0 mV/V100 × 100Request this variant
1.5 kg110 × 10 × 33M3 / 12 mm0.8–1.0 mV/V100 × 100Request this variant
3 kg110 × 10 × 33M3 / 12 mm0.8–1.0 mV/V100 × 100Request this variant
Catalogue cable
4 mm diameter × 350 mm; 4 wires plus shield; confirm the supplied termination.
Input / output bridge resistance
405 ±5 Ω / 350 ±3 Ω
Recommended excitation
5–15 V; maximum 15 V
Compensated / operating temperature
−10 to +40 °C / −10 to +50 °C
vmin / full-scale deflection
Request exact-model values; not assigned by this reference
Wiring functions and configuration limits

Confirm the actual supplied cable chart before connection. Wire colours are model-specific.

EXC+
Blue
EXC−
Black
SIG+
White
SIG−
Red
Shield
Shield
  • Width B is 6 mm at 200 g and 10 mm at the other listed capacities.
  • Drawing specifies five M3 holes, 12 mm depth. Refer to the drawing for their individual faces.

Exact-order certificate scope not supplied with this reference. A catalogue accuracy class is not an SPL certificate.

SPL-CMP-102

Compact potted-flexure single point

Aluminum alloy · IP65 · C3 catalogue declaration

SPL-CMP-102 source mounting outline with millimetre dimensions and thread callouts

Reference outline, not a released production drawing. Download the PDF for its capacity-specific dimensions. Do not scale this image.

CapacityL × W × H (mm)Thread / engagementAnalog outputReference platform (mm)Select
300 g70 × 12 × 22M3 / confirm depth1.0 mV/V ±10%200 × 200Request this variant
500 g70 × 12 × 22M3 / confirm depth1.0 mV/V ±10%200 × 200Request this variant
1 kg70 × 12 × 22M3 / confirm depth2.0 mV/V ±10%200 × 200Request this variant
2 kg70 × 15 × 22M3 / confirm depth2.0 mV/V ±10%200 × 200Request this variant
3 kg70 × 15 × 22M3 / confirm depth2.0 mV/V ±10%200 × 200Request this variant
5 kg70 × 15 × 22M3 / confirm depth2.0 mV/V ±10%200 × 200Request this variant
Catalogue cable
4 mm diameter × 400 mm; 4 wires plus shield; confirm the supplied termination.
Input / output bridge resistance
380 ±40 Ω / 380 ±40 Ω
Recommended excitation
5–15 V; maximum 15 V
Compensated / operating temperature
−10 to +40 °C / −25 to +70 °C
vmin / full-scale deflection
Request exact-model values; not assigned by this reference
Wiring functions and configuration limits

Confirm the actual supplied cable chart before connection. Wire colours are model-specific.

EXC+
Blue
EXC−
Black
SIG+
White
SIG−
Red
Shield
Shield
  • Width A is 12 mm at 300 g, 500 g and 1 kg; 15 mm at 2, 3 and 5 kg.
  • Drawing gives 58 ±0.1 mm longitudinal and 7 ±0.1 mm transverse mounting-hole centres. M3 engagement depth is not assigned.

Exact-order certificate scope not supplied with this reference. A catalogue accuracy class is not an SPL certificate.

Review the wider compact machine integration brief or filter all documented capacities.