DRAWING-LED CROSS-REFERENCE

An equivalent starts with more than capacity.

Request an independent SPL configuration review for an existing Anyload, Tedea-Huntleigh, HBM, Flintec or Zemic single point sensor. No blanket drop-in compatibility is claimed.

Check seven interfaces before ordering.

  1. Rated load, platter tare and overload conditions.
  2. Overall length, width, height and cable exit.
  3. Upper and lower bolt centers, thread pitch and engagement depth.
  4. Maximum platform size and eccentric-load limits.
  5. mV/V output, bridge resistance, excitation and polarity.
  6. 4-wire / 6-wire connections, sense leads and shielding.
  7. Applicable accuracy grade, certificate scope and installation verification.
Send an existing model for review
Engineering concept · not a dimensional drawing
Engineering concept · not a dimensional drawing

Confirm metric or imperial thread standards and every model suffix. Verify bridge impedance and excitation compatibility; matching mV/V alone is insufficient. Before energizing, use the supplied sensor’s wire-function chart rather than copying the old brand’s wire colors.

Original model references for an SPL engineering review

Reference manufacturerModel inputs acceptedSPL mapping status
Anyload108AA / 108BA / 108TADrawing, capacity and platform confirmation required
Tedea-Huntleigh1022 / 1042 / 1130 / 1140 / 1250 / 1263Drawing, capacity and platform confirmation required
HBMPW6D / PW10A / PW12C / PW15AH / PW16Drawing, capacity and platform confirmation required
FlintecPC1 / PC6 / PC42 / PCBDrawing, capacity and platform confirmation required
ZemicL6D / L6E / L6G / L6N / BM6GDrawing, capacity and platform confirmation required

We do not publish inferred hole centers or treat neighboring models as interchangeable. Send the complete suffix and current drawing revision.

Manufacturer examples show why the exact variant matters.

Anyload’s 108AA data separates platform limits and output by capacity group. It should not be treated as the same sensor as the similarly named 108AA3MUN.

Flintec’s PC6 page lists 10–200 kg and a 600 × 600 mm platform; these original-model data do not qualify an SPL replacement.

Third-party trademarks identify the customer’s reference equipment. SinglePointLoadCells is independent and does not imply manufacturer affiliation or endorsement.

CAPACITY + PLATFORM + ENVIRONMENT

Specify the entire load path.

Send the platform size, gross load, mounting drawing and production quantity.

Build an OEM inquiry