SPL-SSW / CONFIGURATION FAMILY

Stainless washdown single point load cells

Meat, seafood, wet filling and pharmaceutical weighing

Stainless washdown single point load cells · conceptual schematic, not a certified model drawing
Stainless washdown single point load cells · conceptual schematic, not a certified model drawing

Match capacity with the maximum platform size.

Rated capacity scope
3–1,000 kg selection requests
Max platform size (mm)
400 × 400 to 800 × 800 mm requested envelope
Material
17-4PH sensing body; 316L housing options
Ingress protection
Laser-welded IP68 / IP69K qualification requests
Output & wiring
Specify mV/V, excitation, bridge resistance and 4-wire / 6-wire needs
Mounting interface
Drawing-specific hole centers, threads, engagement and spacer height
Metrological scope
Request C3 / C6 evidence for the exact model and capacity

Confirm the body, cable gland, connector, immersion conditions and cleaning chemistry together. An ingress rating alone does not establish hygienic certification or chemical compatibility.

Before an OEM sample becomes a production part.

  1. Freeze the capacity, tare, platform and permitted corner load.
  2. Confirm the controlled mechanical and electrical drawings.
  3. Agree sample acceptance: center/corner error, repeatability, temperature and dynamic response where relevant.
  4. Confirm the model-specific test reports, batch identification and change notification.

Send the installation drawing to request a matching dimensional PDF and CAD revision. No substitute drawing or certificate is represented as an SPL qualification document.

Review spacer clearance and overload-stop design