SPL-BASE / CONFIGURATION FAMILY

Overload-stop bench scale base frames

Pre-engineered weighing modules for OEM machine integration

Overload-stop bench scale base frames · conceptual schematic, not a certified model drawing
Overload-stop bench scale base frames · conceptual schematic, not a certified model drawing

Match capacity with the maximum platform size.

Rated capacity scope
Matched to the chosen sensor and platen
Max platform size (mm)
300 × 300 / 400 × 500 / 600 × 600 mm frame requests
Material
304 stainless frame; spacer options
Ingress protection
Cleanability and drainage reviewed per assembly
Output & wiring
Specify mV/V, excitation, bridge resistance and 4-wire / 6-wire needs
Mounting interface
Drawing-specific hole centers, threads, engagement and spacer height
Metrological scope
Request C3 / C6 evidence for the exact model and capacity

Center and corner stops must protect the sensor without touching during normal weighing. Adjustment depends on actual deflection, tolerances and frame stiffness.

Before an OEM sample becomes a production part.

  1. Freeze the capacity, tare, platform and permitted corner load.
  2. Confirm the controlled mechanical and electrical drawings.
  3. Agree sample acceptance: center/corner error, repeatability, temperature and dynamic response where relevant.
  4. Confirm the model-specific test reports, batch identification and change notification.

Send the installation drawing to request a matching dimensional PDF and CAD revision. No substitute drawing or certificate is represented as an SPL qualification document.

Review spacer clearance and overload-stop design